Welcome to the HEALBE family! This guide will walk you through the steps to set up and start using your GoBe U smart band.
1. Prepare the GoBe U Device
Start by removing all protective films from the band - you’ll find them on the top, bottom, and sides of the device.
Next, connect your GoBe U to the charger using the included original magnetic USB cable (please note that the band may not turn on unless it is connected to the charger):
Hold the charging cable near the band; the magnetic lock will snap it into place correctly.
Plug the other end of the cable into a USB port on your computer or a certified wall charger.
Turn on the power source and keep the device plugged in during setup.
LED behavior:
Red light on the charging cable means the band is charging.
Blue light indicates the band is fully charged.
Purple light signals a connection issue - try a different power source if you see this.
2. Download the HEALBE App
To use your GoBe U, you’ll need the HEALBE mobile app:
Open the App Store (iOS) or Google Play (Android).
Search for “HEALBE” and download the app.
If you’ve installed it before, make sure it's updated to the latest version.
You can also scan the QR code found in the printed Quick Start Guide for direct access.
3. Create Your HEALBE Profile
Open the app and follow the prompts to register your HEALBE Profile.
Once registered, the app will automatically set your:
Step length
Volume of one glass of water
Comfortable sleep duration
For more accurate tracking, we recommend adjusting these settings later in your:
Settings
Hydration section
These inputs help GoBe U personalize its internal algorithms and improve accuracy.
4. Connect GoBe U to the App
Make sure Bluetooth is enabled on your smartphone.
Open the HEALBE app and follow the on-screen instructions to connect your device.
When connected, the green diode on the band will glow brightly.
The app will prompt you to install any available firmware updates - keep the device on the charger until the updates are complete.
5. Update and Charge
After pairing, the band may take a few minutes to install updates:
Do not unplug the device during this process.
Once the battery is fully charged and updates are installed, the diode pad on the band will glow solid green.
6. Start Using Your GoBe U
Place the band on your wrist, about 1–2 cm above the wrist bone.
Fasten the strap snugly, but not too tight - the sensors should sit flat against your skin.
Proper placement ensures your GoBe U captures accurate health data while staying comfortable for daily wear.
You're all set! Enjoy exploring your health insights with GoBe U.