Proper maintenance is essential for keeping your GoBe U in good condition and ensuring accurate measurements. Here's how to care for your device:
Casing Care
Avoid salt and chlorinated water
Do not wear GoBe U in the sea or swimming pools — salt and chlorine can damage the casing.Dry after contact with water
If the casing gets wet, gently wipe it dry with a microfiber cloth. If you don’t have one, use any soft, non-abrasive material that won’t scratch the surface.Avoid extreme temperatures
Do not expose GoBe U to temperatures below -10°C or above 40°C.
Sensor Cleaning
Cleaning the sensor regularly helps maintain proper contact with your skin and accurate readings.
We recommend cleaning the sensor several times per week — especially after workouts or heavy sweating.
To clean the sensor:
Apply a small amount of liquid soap or dishwashing liquid (surfactant-based) to the sensor.
Rub gently using a cotton swab or your fingers.
Rinse with water.
Wipe dry with a soft cloth or paper tissue.
When to Clean Your Device
After intense physical activity or sweating
If you notice frequent loss of contact between the sensor and your skin
As a routine, we recommend cleaning 1–2 times a week
Charging Cable Care
Do not wash the charging cable under running water — it is not waterproof.