Before placing the band on the charging dock make sure that the pins on the device are clean and dry. After that, please follow the instructions below.
1. Insert GoBe 2 into the charging dock. Make sure to line up the metal pins on the charging dock with GoBe 2’s bronze-colored pinholes adjacent to the sensors.
2. Plug the USB-C end into the side of the GoBe 2 charging doc and the USB into an appropriate computer port or wall adapter
3. When the charging dock is aligned properly and the power cord is plugged in, the light on the back of the charging dock will turn red.
4. When the battery is full, the light on the charging dock will turn blue.
Please make sure to charge your GoBe 2 device for at least 90 minutes prior to its first use.